Blow bottle mold machine
Auto blow machine A4 (3000A) （4 cavity)
| I. Blowing machine brief introduction | ||||||||
| 3000A series blowing machine probebly is the fastest, the least power consumption, and the easiest liner machine in asia. | ||||||||
| Different from the "180 degree turning robert hand which is easy broken", 3000A is using "linear moving robert hand", which is increase blowing machine"s the speed and duriablity. | ||||||||
| blowing machine has the following distinctive features: | ||||||||
| I: Large mold volume: 4-cavity can fit up to 2L bottle. | ||||||||
| II: High speed: each single cavity can reach to 1000 bph | ||||||||
| III: Simply and flexiable: to blow difference neck is easy and costless with HZ machines. | ||||||||
| IV: High standards: FESTO value and SIMENS PLC. | ||||||||
| V: Precision: Each hole"s tolarance less than 5mm, to gurantee high speed working. | ||||||||
| VI: Water cooling system: no need extra water chiller | ||||||||
| VII: Duriable : all the moving parts is using cooper, copper is sofer then steel ,and oil is auto lubricated. | ||||||||
| VII Advanced: the heating "s tempeatureis automatic adjusted according to the outdoor"s tempeature, there is no need manually setting each day each monent | ||||||||
| Products specification and quotation | ||||||||
| No. | Description | qty | KW | |||||
| 1 | Blowing machine | 3000A-4 | 30 | KW | 1 | 30-45 | ||
| Preform autoloader | 1 | |||||||
| Spare parts and tools | 1 | |||||||
| 2 | high pressure air compressor | 3.2/30 | 37.5 | KW | 1 | 37.5 | ||
| 3 | low pressure air compressor | 1.6/10 | 11 | KW | 1 | 11 | ||
| 4 | 1.0/30 air filter | 3.0/30 | 3 | 0 | ||||
| 5 | 1.0/30 air cold dryer | 3.0/30 | 1 | 0 | ||||
| 6 | air chiller | 5P | 5.7 | KW | 1 | 5.7 | ||
| 7 | high pressure air storage tank | 1.0/30 | 1 | 0 | ||||
| 8 | 4-cavity blow mould | 500ml | P20 | 1 | ||||
| Remarks: 500ml light bottle can reach capacity of 4000BPH | ||||||||
| Machine Technical Parameter | |||||
| Model | 3000A-4 | ||||
| Cavity number | 4 | ||||
| Max bottle vol. | 0.6L | 1L | 1.5L | 2L | |
| output | 4500BPH | 3500BPH | 3200BPH | 2800-3000BPH | |
| Max neck size | 28-40mm | ||||
| Max bot size | 110mm | ||||
| Max bot length | 320mm | ||||
| Power consumption | 25-28Kw | 28-33Kw | 30-35Kw | 32-38Kw | |
| compressure | Working pressure | <> Mpa | <> Mpa | <> Mpa | <> Mpa |
| Low pressure | 1600Ltr/min | ||||
| Blowing pressure | <> Mpa | <> Mpa | <> Mpa | <> Mpa | |
| High pressure | 1800-2200 | 2000-2600 | 2500-3000 | 2500-3200 | |
| Ltr/min | Ltr/min | Ltr/min | Ltr/min | ||
| water chiller | Working pressure | 0.5-0.6.Mpa | 0.5-0.6.Mpa | 0.5-0.6.Mpa | 0.5-0.6.Mpa |
| Temperature | 8-12℃ | 8-12℃ | 8-12℃ | 8-12℃ | |
| Water flower rate | 20Ltr/min | 30Ltr/min | 40Ltr/min | 40Ltr/min | |
| machine size | Machine size | 3.5x1.5x2.7( m) | |||
| Machine weight | 4.2T | ||||
All equipment and device are subject to change without prior notice
